General Safety Instructions
Page 11 of 42
2.2
Environmental Temperature
The CryptoServer LAN must only be operated and stored in a particular temperature range.
■
You must make sure that CryptoServer LAN is always stored at temperatures between
-10 °C and +55 °C (+14 °F to +131 °F).
■
You must make sure that CryptoServer LAN with an integrated CryptoServer Se-Series
Gen2 PCIe plug-in card is always operated at temperatures b10 °C and +50 °C
(+50 °F to +122 °F).
■
You must make sure that CryptoServer LAN with an integrated CryptoServer CSe-Series
PCIe plug-in card is always operated at temperatures b10 °C and +40 °C (+50 °F
to +104 °F).
If the environmental temperature is out of the permitted range, the device sensor will delete
all the data on it.
2.3
19″ Rack
Brackets are attached to either side of the device so that CryptoServer LAN can be installed in
a 19″ rack.
■
You can use slide rails for the installation of the CryptoServer LAN in a 19″ rack which you
can purchase from the manufacturer Utimaco.
■
To install CryptoServer LAN in a 19″ rack, simply attach the securing brackets to the 19″
rack.
■
The temperature inside the 19″ rack may be higher than the temperature outside the 19″
rack. This is particularly true if several devices are installed in the same 19″ rack. Please
ensure that the temperature inside the 19″ rack does not exceed the maximum permitted
environmental temperature.
■
Take care that, when you install the device in a 19″ rack, the ventilation slots are kept free
to ensure that air circulates enough.
2.4
Desktop
If you do not want to install CryptoServer LAN in a 19″ rack, please follow these instructions:
■
Place the device on a secure, stable surface. Avoid impacts and blows to the device.
Содержание CryptoServer LAN V4
Страница 1: ...CryptoServer LAN V4 Operating Manual...
