6
Remember:
you’ll need to connect a filter to every telephone socket that is in use
in your property. You can order additional filters by visiting: uwdc.co.uk/bbshop.
Plug in
1.
Insert the microfilter in the standard master socket.
2.
Connect your telephone cable into the microfilter socket labelled ‘phone’
and the DSL cable into the socket labelled ‘DSL’.
3.
Connect the other end of the DSL cable into the grey socket labelled ‘DSL’
on the back of the router.
4.
Assemble the power supply by sliding the plug into the slot on the power
adaptor and connect it to the router.
technicolour
EXAMPLE
EXAMPLE
POWER SUPPLY
TELEPHONE
STANDARD MASTER SOCKET
DSL CABLE
ROUTER
STANDARD MASTER SOCKET
MICROFILTER
Turn on the main switch and push the black on/off button on the back of the router.
A sequence of lights will come on and may take a minute or two to stabilise.
The way you setup your broadband equipment depends on the type of
telephone socket you have installed in your property.
You’ll need to use a
microfilter for every socket
in your property that has a
device connected to it.
If you have a...
STANDARD MASTER SOCKET
