9
MUST HAVE ACCESS TO THE ATTIC
BEFORE INSTALLATION:
Turn off power source. Review all
safety precautions. Remove existing fan.
1
1
11
10
9
8
7
6
5
4
1. Measure the opening to ensure it is large enough to
accommodate the new fan housing (A) (9 in. x 9 in.).
2. If this fan is not replacing an old fan, be sure to cut a
9 in. x 9 in. opening for the fan housing (A).
2
9"
9"
3. Attach the duct connector (H) to the fan housing (A).
3
A
H
4. Insert suspension bracket I (E) into the bracket cover
on the duct connector side. Then, attach suspension
bracket II (F) and suspension bracket III (G) to the back
of the fan housing (A).
4
E
G
F
A
EXISTING CONSTRUCTION ASSEMBLY INSTRUCTIONS
