OPERATING INSTRUCTIONS
5. To be able to manually turn on the security light from
inside your home, toggle the wall light switch OFF and
ON within 2 seconds. The security light will turn on and
stay on for approximately 8 hours, or until the dusk-
to-dawn sensor detects light in the morning. Once the
dusk-to-dawn sensor detects light, the manual “ON”
mode will automatically go back to its original settings
of the AUTO motion sensor mode. At any point while in
manual “ON” mode, return to the AUTO motion sensor
mode by toggling the wall light switch OFF and ON
again within 2 seconds.
working properly, apply a small bead of silicone
caulking (not included) around the perimeter of the
rear housing cover to prevent water seepage into the
electrical compartment.
screw openings to prevent water seepage into the
housing.
Hardware Used
Silicone Caps
x 2
FF
CARE AND MAINTENANCE
NOT
use solvents or cleaners containing abrasive agents. When clean
SECURITY LIGHT OPERATION
MODE
SLIDE SWITCH
WALL SWITCH
SENSITIVITY
A
Test Mode
Test
Turn on
Any setting
AUTO Motion Sensor
1, 5, or 10 Minutes
ON
Any setting
Mode
Manual “ON” Mode
1, 5, or 10 Minutes
Toggle OFF and ON
Any setting
within 2 seconds
Return to AUTO Motion
1, 5, or 10 Minutes
Toggle OFF and ON
Any setting
Sensor Mode
within 2 seconds
TROUBLESHOOTING
PROBLEM
POSSIBLE CAUSE
CORRECTIVE ACTION
A
Light does not come on
1. No power is being
1. Check that circuit breaker and/or wall
at night when motion
switch power is on.
is detected.
2. Another light source is
2. Turn off surrounding lights and/or re-aim
causing the security light the sensor head.
to think it is daylight.
3. Wiring inside electrical
came loose.
reconnect any loose wiring.
FF
6
