Utilicor MTC-100 Скачать руководство пользователя

Страница: 24 / 24

Warranty

MTC Coring Unit. Operator’s Manual

ATTENTION

WARRANTY

WARRANTY. The Vendor warrants for the benefit of the Purchaser, and not for any other

person, that each new Utilicor product sold by it, or by any of its authorized distributors, will be

free from defects in workmanship and material under normal use and service for a period of

twelve (12) months from the date of delivery to the original Purchaser, provided that this warranty

shall not apply to any Utilicor product which has been subjected to misuse, negligence or accident

or which shall have been altered or repaired by anyone other than an authorized Utilicor

representative in any way which, in the Vendor’s judgment, might affect its stability or reliability,

nor to normal wear and tear, operating costs and adjustments, including but not limited to

adjusting pressure settings, limit switches, timers, relays, fuses, loss of hydraulic oil, cable

replacement or filter replacement. Vendor’s obligation under this warranty is limited to repairing

or replacing, as hereinafter provided, at its option, any part or parts of said product found, to the

Vendor’s satisfaction, to be defective upon examination and provided that such part or parts shall

be returned to the Vendor’s facility at no cost to the Vendor.

Labor charges to install any replacement part will be allowed in accordance with the Vendor's

schedule of applicable labor rates. The Vendor shall not be liable for any freight, travel costs or

other similar costs in connection with this warranty and the Purchaser shall be solely responsible

for all such costs. All products that are not manufactured by or on behalf of the Vendor,

including but not limited to engines and motor vehicles, power control systems, electric motors,

hydraulic cylinders and pumps shall be subject to only the warranty of the manufacturer or vendor

of such product.

THIS WARRANTY IS MADE EXPRESSLY IN LIEU OF ANY OTHER WARRANTY,

EXPRESS OR IMPLIED, INCLUDING ANY IMPLIED WARRANTY OF MERCHANT-

ABILITY OR FITNESS FOR A PARTICULAR PURPOSE. VENDOR WILL IN NO EVENT

BE LIABLE FOR ANY LOSS OF BUSINESS PROFITS, DOWNTIME OR DELAY, LABOR,

REPAIR OR MATERIAL COSTS OR ANY SIMILAR OR DISSIMILAR SPECIAL OR

CONSEQUENTIAL DAMAGE WHATSOEVER, NOR FOR ANY SUM IN EXCESS OF

THE PRICE RECEIVED FOR THE GOODS FOR WHICH LIABILITY IS CLAIMED OR

ASSOCIATED.

Содержание MTC-100

























Результаты поиска

Содержание MTC-100

Отзывы:

Похожие инструкции для MTC-100

Бренды по названию

Популярные бренды

Utilicor MTC-100, Руководство оператора

Результаты поиска

Содержание MTC-100

Отзывы:

Похожие инструкции для MTC-100

Бренды по названию

Популярные бренды