UTILCO BLL-85CU-P, Инструкция по эксплуатации

Страница: 16 / 24

Pg. 16
BLL-85CU-P
4. Make sure all cuts are made perpendicular to the cutting head or damage will occur to blade
and head shear.
5. Advance the blade by pressing the advance trigger and start the cutting cycle.
6. Once cutting cycle is complete, retract the cutting blade by pressing the retract button. NOTE:
There is no need to advance tool to bypass. Once cut is complete, release the trigger. This will
save battery life, time, and the overall life of the tool.
7. You can back the ram up at any time during the cutting cycle, even without the battery.
# Part # Part Description Qty
1 706097 FIT SCREW 1
2 706095 PRESSURE PIN 1
3 101809 ROLL PIN 1
4 706001 COMPRESSION SPRING 1
5 708452 CAP SCREW 2
6 713020 FIXED BLADE 1
7 707680 GUIDE BAR 1
8 713019 MOVING BLADE 1
9 712019 CAP SCREW 2
10 706096 LATERAL PLATE 2
11 701425 LOCKING RING 2
12 710963 HEXAGONAL NUT 2