UTILCO BLL-50CU-P, Инструкция по эксплуатации

Страница: 11 / 24

Pg. 11
BLL-50CU-P
CHARGING A HOT OR COLD BATTERY PACK
The Red Flashing Indicator light on the charger indicates that the battery pack temperature is
outside the charging range. Once the battery pack is within the acceptable range, normal charging
will take place and the red light will be continuous. Hot or cold batteries may take longer to charge.
POWER THE CHARGER WITH AN INVERTER OR GENERATOR
The charger will operate with most generators and inverters rated at 350 Watts or higher.
MAINTENANCE AND STORAGE
Store your charger in a cool, dry place. As a general practice, it is best to unplug battery chargers
and remove batteries when not in use. No battery pack damage will occur, however, if the charger
and battery pack are left plugged in.
REPAIRS
The charger has no serviceable parts.
MOUNTING TO THE WALL
Use the wall mount guides to mark the hanging points.
To reduce the risk of injury, always unplug the charger and remove the battery from
the charger before performing any maintenance. Never disassemble the battery or charger.
Contact a MILWAUKEE service facility for ALL repairs.
To reduce the risk of injury and damage, never immerse your battery or charger in liquid or allow a
liquid to flow inside them.
CLEANING
Clean out dust and debris from charger vents and electrical contacts by blowing with compressed
air. Use only mild soap and a damp cloth to clean the battery pack and charger, keeping away from
all electrical contacts. Certain cleaning agents and solvents are harmful to plastics and other
insulated parts. Some of these include gasoline, turpentine, lacquer thinner, paint thinner,
chlorinated cleaning solvents, ammonia and household detergents containing ammonia. Never
use flammable or combustible solvents around batteries, charger, or tools.