UTC 81000-UTC, Руководство по эксплуатации

Страница: 9 / 11

81000-UTC
Maintenance
1. Drain all hoses that were used in an appropriate oil disposal tank.
2. When finished using the TOE, coil the Red and Black Hoses and place in the TOE side
holder. Place the Adapter Fittings and Hoses back in their case. Store the case in the
top-back of the TOE.
3. When oil flow through the TOE becomes very slow, even with higher air pressure, replace
the TOE oil filter.
Troubleshooting
1. Turn on the power switch of the TOE but it does not operate.
check the power indicator is light or not.
Check the pump work or not
2. The hoses are connected but no oil flow is viewed from the View Flow tubes, even with
higher air pressure.
verify the correct settings of the Fuel Pressure-Recycle Control knob and the
Filling-Recycle Reverse Control knob.
3. The hoses are connected but no oil flow is viewed from the view Flow tubes, even with
higher air pressure, and the engine running.
Check to see if the direction of the oil inlet and oil return hoses are reversed.