UTC 81000-UTC, Руководство по эксплуатации

Страница: 8 / 11

81000-UTC
7. During this process, View the new and used oil flow rate. They should flow at equal rates.
If used oil flow fast than new oil, please adjust the ball valve fixed on the oil black return
line to make them have the same flow rate.
8. During the oil exchange process, switch gears in sequential order, starting with first gear.
Keep in each gear for 10 seconds.
9. During this process view the oil flow through the TOE New and Used Oil View tubes.
When the color of the oil is the same in both tubes, turn off the engine and power switch
of the TOE, the process is complete.
10. Reconnect the vehicle oil output (return) line from the transmission to the input of the
transmission radiator. Securely tighten clamps.
Emptying Used Oil
1. Using an Adapter Hose from the kit, connect one end to the TOE New Oil Input Hose Fast
Connector, and the other end to the TOE Return Adapter Fast Connector. See illustration
below.
2. Connect the Black Hose to the TOE Pressure Adapter Fast Connector. Place the other end
of the Black Hose in an appropriate disposal tank.
3. Turn the left Control knob to the Pressure position.
4. Turn the right Control knob to the Filling position.
5. Turn on the power switch of the TOE ,View the used oil movement through the used oil
View Flow tube.
6. When all the used oil is transported from the TOE Used Oil Tank, turn off the power
switch of the TOE. Recover all the hoses to its original position.
7. Dispose of used oil and solvents in a proper manner as dictated by local environmental
codes.