background image

11969004 Rev A 

© 2020 UTC RETAIL. 

 

 

All rights reserved. 

2600 POS System User Guide 

All rights reserved. No part of this document may be reproduced, stored in a retrieval 
system, or transmitted in any form or by any means, electronic or mechanical, including 
photocopying, recording, or otherwise, without the prior written permission of UTC RETAIL. 

This User Guide was prepared by UTC RETAIL for use by Qualified Service Personnel only. 
All attempts have been made to ensure that the information presented in this manual is 
correct. No liability, expressed or implied, will be assumed by UTC, its dealers, or affiliates, 
for damage resulting from the use of this information.  

If a unit needs to be shipped to UTC RETAIL for repairs, please return it in the original 
packaging material and shipping container. If you purchased the 2600 POS System through 
a dealer, and the dealer is unable to answer your questions, please call UTC RETAIL 
Technical Support at 1.800.349.0546. 

This equipment has been tested and found to comply with the limits for a Class “A” digital 
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide 
reasonable protection against harmful interference when the equipment is operated in a 
commercial environment. This equipment generates, uses, and can radiate radio frequency 
energy and, if not installed and used in accordance with the instruction manual, may cause 
harmful interference to radio communications. Operation of this equipment in a residential 
area is likely to cause harmful interference, in which case the user will be required to correct 
the interference at his/her own expense. 

This document may not be used for any purpose other than its intended use. This document 
must be downloaded in its entirety; it may not be reproduced, stored or transmitted in part 
without the prior written permission of UTC RETAIL. All attempts have been made to ensure 
that the information presented in this document is correct. No liability, expressed or implied, 
will be assumed by UTC RETAIL, its dealers, or affiliates, for damage resulting from the use 
of this information. 

 

 

WARNING: CMOS Battery Damage 

Replace your system’s CMOS RAM battery only with identical CR-2032 3V Lithium-Ion 
coin cell (or equivalent) battery type to avoid risk of personal injury or physical damage to 
your equipment. 

Always dispose of used batteries according to the manufacturer’s 

instructions, or as required by the local ordinance (where applicable). The damage due to 

not following this warning will void your warranty. 

 

All access to internal components is restricted to Authorized Service personnel only.

 

 

Содержание 2600











Отзывы: