UltraView IP XP3 box day/night range camera
5 EN
Connecting the devices
1. Power
LED.
2. Reset
button.
Press to reset camera to
factory default settings.
3. Ethernet
RJ45
port.
Connect to network devices.
4. DIP
switches.
Configure camera settings.
5. Alarm input and output.
Connect to be able to trigger
an alarm at the network
device.
6. Power
supply.
Connect 12 VDC or 24 VDC
power supply.
7. Video
output.
Connect to a CCTV monitor
Setting the DIP switches
You can set up six camera functions using the DIP switch bank on the
rear of the camera. Figure 2 on page 6 shows the DIP switch layout.
For detailed descriptions on the functions of the DIP switch settings,
please refer to the user manual.
