Utax PF 730 Скачать руководство пользователя

Страница: 65 / 118

3NJ-4

1-4-8

Settings/

Detection

1. Check if the margin is

4.0+1.5/-1.0mm from the

leading edge of paper.

2. Perform U034 to check the

reference mark is situated at
20mm±1mm from the edge.
(Fuser jam)
(see page 1-3-19)

If the check line is not situated at 20mm±1mm from the

leading edge, adjust the leading margin by U402. (see

page 1-3-166)

3. Check the panel if the paper

size is correctly detected and

the cassette size is not

fixed.(Paper jam caused by

continously fed paper, DF

Jam J611X) Perform U000 to

obtain a Event Log to check if

the paper size and the size of

the paper loaded are met

when jam has occurred and if

the size of the original

document and the paper size

are met. see page 1-3-12)

If the paper size is incorrectly displayed, adjust the

positions of the paper set guide cursors in accordance

with the paper size, making sure that the paper is not

askew to activate the size detector switch.

4. Check that paper settings are

made in accordance with the

paper being used. (Jam

caused by faulty separation)

Select Original/ Paper settings under common settings

in the system menu to set media type and weight of

paper.

Coveying unit

Check the main unit vertical

conveying unit or the front and

back parts and right and left parts

of the deck's horizontal

conveying unit are slightly

strained and closed.

To open, first open the right-side conveying unit and

close firmly. (Check the position of the safery switch)

Conveying

guide,

approaching

guide, feed-

shift guide

1. Check that the foreign

objects including scrips,

paper clips, etc., do not exist

in the paper conveying paths.

If foreign objects such as scrips, etc., remain in the

paper conveying path, remove.

2. Check that the paper

conveying guide and the

separation needles are not

contaminated with toner,

paper dusts, etc.

If dirty, clean the guide, ribs (by a cloth), and the

separation needles (by a cleaning brush).If the ribs of

the conveying guides were broken or deposited with

toner, replace.

Check items

Check description

Corrective measures

Содержание PF 730























































































































Результаты поиска

Содержание PF 730

Отзывы:

Похожие инструкции для PF 730

Бренды по названию

Популярные бренды

Utax PF 730, Руководство по обслуживанию

Результаты поиска

Содержание PF 730

Отзывы:

Похожие инструкции для PF 730

Бренды по названию

Популярные бренды