Utax LP3335 Скачать руководство пользователя страница 61

Страница: 61 / 94

Maintenance

4-3

Replacing the Toner Container

This section explains how to replace the toner container.

Open the top cover.

Turn the lock lever to the unlock position. Push the lock lever to the
position marked by the arrow and pull out the toner container.

CAUTION

Do not attempt to incinerate the Toner

Container. Dangerous sparks may cause burns.

IMPORTANT

During toner container replacement, temporarily move

storage media and computer supplies (such as floppy disks) away
from the toner container. This is to avoid damaging media by the
magnetism of toner.

IMPORTANT

UTAX GmbH

is not liable against any

damages or problems arising from the use of toner containers other than
those designated as original

UTAX

toner containers. For optimum

performance, it is also recommended to use only the

UTAX

toner

containers which are specifically intended for use in your country or
region. If the toner container for another destinations is installed, the
printer will stop printing.

Note

You do not have to turn printer power off before starting

the replacement. Any data that may be processing in the printer
will be deleted if you turn the printer power off

Note

Put the old toner container in the plastic bag (supplied

with the new toner kit) and discard it later according to the local
code or regulations for waste disposal.

Содержание LP3335































































































Результаты поиска

Содержание LP3335

Отзывы:

Похожие инструкции для LP3335

Бренды по названию

Популярные бренды

Utax LP3335, Инструкция по эксплуатации

Результаты поиска

Содержание LP3335

Отзывы:

Похожие инструкции для LP3335

Бренды по названию

Популярные бренды