Utax LP3335, Инструкция по эксплуатации

Страница: 39 / 94

Connecting and Printing 3-5
TCP/IP
This section describes how to enable the TCP/IP protocol.
1
If
TCP/IP
is set to
Off
, use U or V to select
On
and press [OK] .
2
Press Z . Each time you press U or V , the selection changes.
3
Display the item you want to set and press [OK] . A blinking question
mark (
?
) appears while you are setting
DHCP
and
Bonjour
. A
blinking cursor (
_
) appears while you are setting
IP Address
,
Subnet Mask
and
Gateway
.
4
Press U or V to select
On
or
Off
as the setting for
DHCP
and
Bonjour
.
For the
IP Address
,
Subnet Mask
and
Gateway
settings, press
U
or
V
to move the blinking cursor to the number you want to
change (
000
to
255
). Use Y and Z to move the cursor right and left.
5
Press [OK] .
6
Press [MENU] . The display returns to
Ready
.
Note Check with your network administrator for the network
address settings.
>TCP/IP
On
>>DHCP
Off
>>IP Address
000.000.000.000
>>Subnet Mask
000.000.000.000
>>Gateway
000.000.000.000
>>Bonjour
Off
>>Subnet Mask
000.000.000.000