Utax CLP 3416, Инструкция по эксплуатации

Страница: 98 / 166

5-18
Operation
+
You can also directly adjust the desired contrast using the key, press this key several times
until the required adjustment is obtained without using 846 .
847 OK - ADVANCED FCT / COPY / LUMINOSITY
+
The
LUMINOSITY
parameter is used to make your original document lighter or darker. Adjust
the brightness required using keys and , then validate the choice with the
OK
key.
848 OK - ADVANCED FCT / COPY / BINDING
+
The
BINDING
parameter is used to choose the long or short side according to the type of binding
of your document. Make your choice using keys and , then validate the choice with the
OK
key.
Caution -
All settings made using this menu become default settings of the machine.
85 OK - ADVANCED FCT / SCAN. & PRINT
+
Use keys or of the browser to scroll the setting described below that you want to modify.
+
Validate your setting by pressing the
OK
key.
851 OK - ADVANCED FCT / SCAN. & PRINT / PAPER
+
Select NORMAL or THICK paper using and keys.
+
Validate your setting by pressing the
OK
key.
Note: 1) When
THICK
paper type is selected, the print speed is slowed down.
2) Use the manual feeder for paper with a weight greater than 90 g/m
2
.
852 OK - ADVANCED FCT / SCAN. & PRINT / PAPER TRAY
+
Select the paper tray that you want to use;
AUTOMATIC
,
LOWER
or
UPPER
using and
keys.
+
Validate by pressing the
OK
key.
853 OK - ADVANCED FCT / SCAN. & PRINT / PAPER SAVE
This function prints all your documents duplex.
Note: This function requires the prior installation on the rear of your machine of the duplex unit and the additional
paper tray.