Utax 5025, Инструкция по эксплуатации

Страница: 57 / 361

2-20
Preparation before Use > Energy Saver function
Energy Saver function
Low Power Mode and Auto Low Power Mode
Low Power Mode
To activate Low Power Mode, press the
Energy Saver
key. Touch panel and all indicators on
the operation panel will go out to save power except the
Energy Saver
,
Power
, and Main
Power indicators. This status is referred to as Low Power Mode.
If print data is received during Low Power Mode, the machine automatically wakes up and
starts printing. Also when fax data arrives while the machine is in Low Power Mode when
using the optional fax, the machine automatically wakes up and starts printing.
To resume, perform one of the following actions. The machine will be ready to operate within
10 seconds.
• Press any key on the operation panel.
• Open the original cover or the document processor.
• Place originals in the document processor.
Note that ambient environmental conditions, such as ventilation, may cause the machine to
respond more slowly.
Auto Low Power Mode
Auto Low Power Mode automatically switches the machine into Low Power Mode if left idle for
a preset time. The default preset time is 1 minute.
For more information about configuring settings, refer to
Low Power Timer on page 9-24
.
NOTE
When a preset time of Low Power Timer and Sleep Timer is same, Sleep overrides Low
Power Mode.