4
Before Use
• Inspect the ladder after delivery and before use
to confirm condition and operation of all parts.
• Do not use a damaged ladder.
• Ensure that you are fit enough to use a ladder.
Certain medical
conditions or medication, alcohol or drug abuse
could make ladder use unsafe.
• Ensure the ladder is suitable for the task.
• Remove any contamination from the ladder
such as wet paint, mud, oil or snow.
• For professional use a risk assessment should
be carried out respecting the legislation in the
country of use.
• Identify any electrical risks in the work area,
such as overhead lines or other exposed
electrical equipment and do not use the ladder
where electrical risks occur.
• Make sure all locking mechanisms for all extended
rungs/steps are checked and locked before use.
• The ladder shall be used/stored in temperatures
between -20 - +60 degrees °C.
Before use, always check;
• The stiles (uprights) are not bent, bowed,
twisted, dented, cracked or corroded
• The telescopic tubes around the fixing points for
other components are in good condition
• Fixings (usually rivets, screws or bolts) are not
missing, loose or corroded
• Rungs are not missing, loose, excessively worn,
corroded or damaged
• Hinges between front and rear sections are not
damaged, loose or corroded
• Guide brackets are not missing, damaged,
loose or corroded and engage properly on the
mating stile
• Rubber feet and end caps are not missing,
loose, excessively worn, corroded or damaged
• The entire ladder is free from contaminants
(e.g. dirt, mud, paint, oil or grease)
• Locking catches are not damaged or corroded
and function correctly
If any of the above checks cannot be fully satisfied,
you should
NOT
use the ladder.
Cleaning
For safety and functionality reasons the ladder, par-
ticularly the stiles and rungs, must always be kept
clean. Dirt, filings, paint spots, glue etc. must be
wiped away before the ladder is closed. Clean the
ladder using a rag and a small amount of solvent.
If needed, when clean, the telescopic tubes can
be treated with silicon spray. Spray in the tube and
wipe dry. The ladder must always be kept dry so
that dust does not impair its functionality.
Service & Maintenance
Any service or repair work must always be carried
out by an authorized service workshop, which
determines suitable action in each individual case.
Please contact the producer or distributor for service
& maintenance.
If rubber feet or end-caps are getting worn, replace
these for optimal safety. Never use the ladder
without rubber feet (slip protection) and end-caps
to prevent dust, metal chips or similar from getting
into the tubes. New feet/end caps can be obtained
from retailers. Only original spare parts may be used
for safety reasons.
In case of service or repair contact your retailer to
find the location of your nearest authorized service
partner.
Transport & Storage
Always carry and transport the ladder completely
closed and compacted to protect the telescopic
tubes from any damage that can impair the functio-
nality of the ladder.
The ladder shall be stored:
• Away from areas where its condition could
deteriorate more rapidly (e.g. dampness, exces-
sive heat, exposed to the elements)
• Where it cannot be damaged by vehicles, heavy
objects, or contaminants.
• Where it cannot cause a trip hazard or an obstruction.
• Where it cannot be easily used for criminal
purposes.
• Permanently positioned (e.g. scaffolding), or/
and secured against unauthorized climbing (e.g.
by children)
EN
Congratulations on your purchase of your USteps telescopic ladder.
The unique design features ensure that a USteps ladder is safe and
easy to use. Before use, please read the instructions carefully on how to
use, manage and maintain your ladder.
