USR-W630 User Manual
Technical Support:
Jinan USR IOT Technology Limited
www.usriot.com
27
Figure 24 firmware upgrade
And waiting upgrade about 40s,don
’
t cut off the power.
5. Setting Method
W630 supports AT commands and webpage setting.
W630 and PC should join the same WIFI, or set the PC join the WIFI of W630.
5.1. Webpage Setting
W630 default AP mode.
Table 7 webpage default parameters
Parameter
Default
SSID
USR-W630_XXXX
IP
10.10.100.254
Subnet mask
255.255.255.0
Account
admin
Password
admin
5.1.1. Open The Webpage
Make PC join the WIFI of W630, enter 10.10.100.254, the account and password are both admin. There are eight
pages on the management page, which are "Quick Configuration", "Mode Selection", "Wireless Access Point Settings",
"Wireless Terminal Settings", "Serial Port and Network Settings", "Ethernet Function Settings", "HTTPD Client Mode",
"Advanced Settings" and "Module Management".