USR IOT USR-DR404 страница 71 Скачать руководство пользователя

Страница: 71 / 86

USR-DR404 user manual

www.usriot.com

Jinan USR IOT Technology Limited

www.usriot.com



time.: TCPB timeout, <= 600 (600s), >=0 (0 means no timeout), default is 0.

4.3.4.28. AT+TCPLKB

Function: Query whether TCPB connection is established
Format:
AT+ TCPLKB<CR>

+ok=<sta><CR>< LF ><CR>< LF >

Parameters:



sta.: returns whether TCOB is established.



on, established



off, not established

4.3.4.29. AT+EPHY

Function: Enable/Disable Ethernet interface.
Format:
Setting: AT+ EPHY<CR>

+ok<CR>< LF ><CR>< LF >

Parameters:
After sending this command, enable the Ethernet interface. This command is not saved, that is, Ethernet is still

disabled after restart. If need to save this setting, please use the factory setting command. If need to enable the Ethernet
interface permanently, please use the “AT + FEPHY = on” command.

After the Ethernet interface is closed, the power consumption of the module can be reduced, so it is recommended to

set it to off when the Ethernet interface is not used. The Ethernet interface is enabled by default.

With “AT + FVEW = disable / enable”, set the Ethernet interface to LAN port (disable) or WAN port (enable). This

command will take effect after restoring the factory settings.

4.3.4.30. AT+FUDLX

Function: Enable/Disable RS485
Format:

AT+FUDLX=on/off<CR>

+ok<CR>< LF ><CR>< LF >

This command enables or disables the RS485 interface. By default, RS485 is enabled, and the 485 control pin is RTS.

This command takes effect after restoring factory settings.

Содержание USR-DR404























































































Результаты поиска

Содержание USR-DR404

Отзывы:

Похожие инструкции для USR-DR404

Бренды по названию

Популярные бренды

USR IOT USR-DR404, Руководство пользователя

Результаты поиска

Содержание USR-DR404

Отзывы:

Похожие инструкции для USR-DR404

Бренды по названию

Популярные бренды