USR-BLE100 User Manual
Jinan USR IOT Technology Limited
/ 14
3
1. Quick Start
This chapter aimes at getting start USR-BLE100 quickly. It’s recommended that user read this chapter
systemically and operate it according to instruction to make a scientific knowledge. Following chapter will
introduce specific details and instruction, user can read interested chapter directly.
If you have any question, feed it back to customer center please:
1.1.
Hardware Testing Environment
Module slave mode is similar to smart devices on the market like Smart Band. This module support
standard BLE communication protocol, user can independent develop software and communicate by connect
module with master device like mobile phone. This test need the device which support ultra-low power
Bluetooth:
The device with BLE function and Android system V4.3 or above.
Iphone 4s version or above device with IOS7.0 or above operating system.
1.2.
Data Transmission Testing
Take Android mobile phone as example:
Testing environment: Android 5.0
Testing software : Android Bluetooth Module Debugger and USR-TCP-Test
Use the USR-TCP-Test to open the serial number of the connected module, set the baud rate as 57600.
(User can use AT instruction to change parameter, following chapter will introduce it.)
Link light will flash once per second when module power-on. Using the Module Debugger software to
search (click magnifying glass button) , you can find the device named USR-BLE100, as shown in figure 1.
Figure 1
Module Debugger software
Click on the device to connect with it, as shown in figure 2, the LINK light will keep on.
