16
17
USM Haller lock C
Instruction manual
Date
05.22/en
4.4.1 Renaming a lock
In “Lock settings” you can change the name of the
lock. This can help you to find your way around and
locate your locks; it is also helpful when managing
several locks. The serial number of the relevant lock
is retained and can still be seen in the “Lock pool”
area below the new name. You can name the lock as
you wish.
Examples:
— Number the locks: 1, 2, 3, etc.
— Describe the location:
row 2 locker 3, top-left locker, lock 5 in green unit
— For permanently assigned locks, you could also add details
such as: the person’s name, department, site
Renaming a lock
1. Go to the “Lock settings” of the desired lock.
2. Press “Rename” and change the name.
3. Then tap on “Save” to save the new name.
4.4.2 Auto Close
This function speeds up the closing process for
users.
If this function is activated, end users only need to
hold their smartphone on the lock to open the locker.
To close it, end users simply turn the lock handle 90°
counterclockwise without needing to use the smart-
phone again. If the handle isn’t turned 90°, it locks
automatically after 4 seconds.
Flashing signal: 2 × green
(1 × green, after 4 seconds 1 × green)
This function can only be activated in “Personal
Locker mode” and “Shared Locker mode”.
In earthquake-prone countries, we recommend using
the snap turning lock C. Do not activate the “Auto
Close” function if you are using snap turning lock Cs.
4.4.3 Firmware updates
As Power User, you can carry out firmware updates
by yourself. If you already have the latest firmware
version, the “Update firmware” button will be greyed
out.
If a new firmware update is available, the button will
be white.
The update can be performed while locks are open
or locked.
Updating firmware
1. Tap on the “Update firmware” button and follow the
instructions in the app.
Make sure your smartphone doesn’t go into sleep
state during the process. Keep your smartphone
near the lock the entire time.
Once the firmware has been successfully updated, the lock
will restart after around 30 seconds. Wait for the flashing
signal.
Flashing signal: 3 × green
The lock is now updated. All previous programming
remains saved.
4.4.4 Battery charge
In “Lock settings” you can also find a battery charge
display for the selected lock C batteries.
Green: Batteries are sufficiently charged
Orange: Replace the batteries at the next opportunity
p. 20
4.4.5 Log entries
You can view the latest log entries in this list. When
the lock was open or closed and which device was
used (ID code of the key card or smartphone).
4.4.6 Emergency opening with
“Open the locker”
As Power User, you can open any of the lock Cs in
your lock pool using the “Open the locker” function,
similarly to the Admin card.
Home
Overview
Public Locker
Shar
ed Locker
Personal Locker
Logout
Locks
Help
Settings
Firmware:
Hardware:
00.05.077
01.60
Update Firmware
