XTD-33 I
NSTRUCTION
M
ANUAL
U
LTRA
★
S
TEREO
L
ABS
, I
NC
.
- 6 -
• Provide Proper Ventilation.
The operating temperature should be between
0º C and 50º C. The humidity should be <90% at 40º C or below and
<60% at 41º C to 50º C. The cooling method is by convection.
• Keep Product Surfaces Clean and Dry.
Disconnect the power cable from
the power source before cleaning. Do not use liquid cleaners or aerosol
cleaners. Use a damp cloth for cleaning.
• Do Not Push Objects Into Opening of this Product.
Never insert objects
into the product through openings.
• Do Not Operate In Wet or Damp Conditions.
• Do Not Operate In an Explosive Atmosphere.
• Prevent the Spilling of Liquids onto the System Components.
• Inspect the power cable and all cables prior to use.
Confirm that the
power cable and other interconnecting cables are free from damage.
Safety Standard
The EN 60065 standard specifies safety design requirements that reduce or
eliminate the risk of personal injury to both the product user and service
personnel. This product is designed and tested to meet the standards of the
International Electrotechnical Commission (IEC) European Norm (EN) 60065
(The Standard for Information Technology Equipment Including Electrical
Business Equipment).
Unpacking
The shipping box contains:
This Owner’s Manual
XTD-33 Screw Terminal Plugs (4)
Power Cord IEC type for the country specified when ordered
Backup Power Transformer (Stepdown Transformer also required for the
Backup Transformer in 230 VAC systems)
Configurations
The XTD has three available channels which may be configured with two or
three bands for each channel simultaneously. Inputs and outputs may
individually be configured as balanced or unbalanced. When an input or
output is used in the unbalanced mode, the negative signal should be
connected to signal ground (“E”).
Options
If the standard speaker selections do not match your configuration, USL may
be able to provide you with a customized program to optimize your audio.
