XTD-33 I
NSTRUCTION
M
ANUAL
U
LTRA
★
S
TEREO
L
ABS
, I
NC
.
- 11 -
1)
IEC Power inlet
- Accepts a standard IEC cord
2)
Fuse Holder
- Determines AC Mains configuration. Must be set to match the local AC Mains
voltage or the XTD may be damaged or not operate properly.
3)
Emergency Bypass Power
- Connect the furnished external power supply here.
4)
Inputs
- Accepts the Left, Center, and Right signals from the Cinema Processor or other audio
source. Balanced or Unbalanced signals may be used. In Unbalanced mode, the negative signal input should be connected to audio source ground.
5)
Right Channel Outputs
- Provides the signal outputs from the XTD in two or three bands as
determined by the Program Select and Bypass Mode switches on the front panel. Balanced or Unbalanced signals may be used. In Unbalanced mode, the negative signal should be connected to signal ground (“E”).
6)
Center Channel Outputs
- Provides the signal outputs from the XTD in two or three bands as
determined by the Program Select and Bypass Mode switches on the front panel. Balanced or Unbalanced signals may be used. In Unbalanced mode, the negative signal should be connected to signal ground (“E”).
7)
Left Channel Outputs
- Provides the signal outputs from the XTD in two or three bands as deter-
mined by the Program Select and Bypass Mode switches on the front panel. Balanced or Unbal- anced signals may be used. In Unbalanced mode, the negative signal should be connected to signal ground (“E”).
