background image

- 4 -

Important Safety Instructions:

1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near water.
6) Clean only with a dry cloth.
7) Do not block any ventilation openings. Install in accordance with the 
manufacturer’s instructions.
8) Do not install near any heat sources such as radiators, heat registers, 
stoves, or other apparatus (including amplifiers) that produce heat.
9) Do not defeat the safety purpose of the polarized or grounding-type plug. A 
polarized plug has two blades with one wider than the other. A grounding-type 
plug has two blades and a third grounding prong. The wide blade
or the third prong is provided for your safety. If the provided plug does not fit 
into your outlet, consult an electrician for replacement of the obsolete outlet.
10) Protect the power cord from being walked on or pinched, particularly at 
plugs, convenience receptacles, and the point where they exit from the ap-
paratus.
11) Only use attachments/accessories specified by the manufacturer.
12) Use only with a cart, stand, tripod, bracket, or table specified by the 
manufacturer, or sold with the apparatus. When a cart is used, use caution 
when moving the cart / apparatus combination to avoid injury from tip-over.
13) Unplug this apparatus during lightning storms or when unused for long 
periods of time.
14) Refer all servicing to qualified service personnel. Servicing is required 
when the apparatus has been damaged in any way, such as power-supply 
cord or plug is damaged, liquid has been spilled or objects have fallen into 
the
apparatus, the apparatus has been exposed to rain or moisture, does not 
operate normally, or has been dropped.

15) WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE.
16) DO NOT EXPOSE TO DRIPPING OR SPLASHING. DO NOT PLACE 
OBJECTS FILLED WITH LIQUID, SUCH AS VASES,ON THIS APPARA-
TUS.

WATCH FOR THESE SYMBOLS:
         
        The lightning bolt triangle is used to alert the user to the risk
         of electric shock.
         
        The exclamation point triangle is used to alert the user to
         Important operating or maintenance instructions.

Содержание ECI-60





















Отзывы: