1
) Plug 120VAC power adapter into wall outlet.
2) Connect the other end of cord into the
bottom jack of the CatMouse
TM
unit.
3) Press the “ON/OFF” button once (fig. 1).
The green LED power indicator will light
up indicating the unit is activated and
ready to work properly, after selecting
the desired function.
4) To adjust level of odor elimination, locate
top edge of unit. Find the “LOW/HI/BOOST”
switch (fig. 2).
•
loW
Push switch to left for the LOW
mode which emits intermittent
Oxyions
TM
in approximately one minute
on/one minute off intervals, for moderate
full time odor control.
•
Hi
Push switch to center for the HI
mode which emits the units maximum
amount of Oxyions
TM
for high full
time odor control.
•
booST
Push switch to far right for the
BOOST mode, which activates the Fan
AND HI Oxyion
TM
output to eliminate
severe odor problems quickly for a
temporary 12-24 hour period.
5) Press the “ON/OFF” button again to turn
off the unit. Press again to turn on unit in
the pre-selected mode as desired.
14
CATMOUSE
TM
operation & installation
fig. 1
fig. 2
DangeR:
Keep away from water sources including rain,
bathtubs, sinks and pools.
*CM-X1 USER GUIDE_Layout 1 2/21/12 3:18 PM Page 16
