Display Interface
Different Modes on Water heater panel
11
12
In the normal case, there would be four display interface in the display panel
In the normal case, there would be four display interface in the display panel
Timer Mode: (Auto Memory function)
Water Heater will ensure a hot water supply with
set temp. at the required time. (During bathing
time it will keep heating for 1 hour to ensure
constant amount of hot water supply), for rest of
hours it remains in standby status. It features a
timely hot water supply everyday for special
demand with better energy saving performance
(Compared to Standard Mode).
For Example: If timer set as 8:00am, water heater
will automatically compute the time to start the
heater, computing based on: the setting
temperature, actual temperature, capacity,
heating power… According to the compute result,
the water Heater may start heating at 7:30am,
that the hot water at setted temperature will be
ready at 8:00am and from 8:00am, the heater will
continue heating for 1 hour. After this, water
Heater stand by.
Applicable Interface
[OFF] Interface
The smart chip will turn off all
display
[Standby] Interface
When the heater is not working for
long and has gone into standby model
Time Display Interface
The smart chip will show the
clock function
Temp. Display Interface
The smart chip will show the setting
and actual temperature of water
Water Heater will work on regular intervals to
keep the water at setting temp. (such as 75
0
C)
and supply hot water
Applicable Interface
Off Standby Time Display Temperature Display
X
X
✓
✓
Off Standby Time Display Temperature Display
X
X
✓
✓
Standard mode
Timer Mode