Technical Specification
Operating Instructions
The water heater works under the pressure defined by the main water-pipe line
when connected.
Operating Guides
Temperature Settings: According to your required temperature rotate the
temperature adjusting knob in clockwise direction.You can select to use the
heating temperatures without grades in the temperature range from 20
˚
to 75
˚
C
from low to high
*Under standard test conditions, when tested in accordance with relevant standards. Actual electricity consumption
will depend on how the appliance is being used.
5
6
Model / Characteristics
Verve 25L
Verve 15L
Volume, L
25
15
Mounting
Vertical Vertical
Dimensions, mm
A
B
Voltage, V/hz
220-240/50
220-240/50
Power, W
2000
2000
Pressure, bar
7.5
7.5
Protection, IP
IPX4
IPX4
Standing loss in
KWH/24hrs/45
Star Rating
Water Entering:
After connecting all the pipes, rotate the hot and cold water blending valve in
clockwise direction towards maximum temperature. Then, open the water inlet
pipe. At this time the water will start flowing in the tank.
Cautions:
During operation, please make sure that the Inlet Valve is open before switching on the
Water Heater, till the time it is switched off. The inlet valve can be closed partially to
regulate the flow of water. The Outlet Valve is used to control the flow of heated water.
Please make sure that the tank is filled with water by opening the outlet valve once
before switching on the power.