usha TFH LED, Инструкция по эксплуатации

Страница: 8 / 12

8
Battery replacement in the remote control
• Slide out the battery holder at the rear of remote control. (Picture 1)
• Insert a 3V Li battery (CR 2032) into the tray of the door, battery text facing
up. (Picture 2)
• Slide the battery holder back into the remote control; it is now ready for use.
Operation of the remote control
Remote control panel
There are six function keys on the remote control and their functions match
those on the control panel of the heater.
When operating the remote control, always point the remote towards the display
window of the heater; the signal distance is approx. 6 meters.
clEANING AND MAINTENANcE
Make sure the power switch is turned off and the plug is disconnected from
the power socket before cleaning or any maintenance. Otherwise, it may cause
electric shock.
1. Cleaning the unit surface:
Clean the surface with damp cloth. Do not use corrosive detergent or solvent
to clean, such as Petrol, Tina, etc. Never wash the unit directly with water or a
soaked cloth.
2. Clean the air filter (recommended monthly, if required)
• Remove the air filter for cleaning as shown in the following diagram.
• Do not use any chemicals for cleaning the filter.