usha TFH LED, Инструкция по эксплуатации

Страница: 6 / 12

6
Control Panel and display window
STANDBY
Press the standby “ ” key, the power indicator light will turn ON. The heater
begins operation at low heat power - (LED indicator on the heating function
shows “LOW”).
Press this key again and all functions will stop. The LED indicator turns off and
the unit is back in standby mode.
HEAT
When the unit is operated at low heating power, press the “ ” key, the high
heating power will be turned on, and the LED indicator will show “HIGH”.
Pressing this key allows for the selection of either low heat or high heat power
options.
SWING
When the unit is operating, press the “ ” key, the heater body will begin turning
left and right automatically up to 76°. The LED indicator of this oscillation function
will be turned on.
Press this key again, the oscillation function will stop and the LED light will turn
off.
SET
When the unit is in operation, press the “ ” button to set the timer or thermostat.
Note: when the set key “ ” has been pressed to set the timer or change the
required temperature, the LED light will flicker for approx 5 seconds.