INSTALLATION INSTRUCTIONS
1.
Add Water and assembly
a)
Put the product on a flat surface or table, and pull out the nozzle with vertical direction,
figure1;
b)
Lift the tank cover(refer figure 2 ), rollover the DMC Cover, and loosen the DMC cover in
anticlockwise direction, (figure 3), put the water tank under the tap, figure4, filled with
water.
c)
Fix the DMC Cover in clockwise direction, (figure 5); you need check whether there is a
seal ring and whether it is in the internal slot.
d)
Put the water tank onto the unit base with alignment mark slowly, figure 6.; When you
listen to the gurgle, it means there is water flowing into the water tray. Remark: If you
don’t listen to the gurgle, please lift the DMC cover and put the tank cover onto the unit
base slowly times until listening to the gurgle.
e)
Connect the nozzle which you want with the water tank, figure 7; when connecting the
nozzle, please take care the positioning slot.
OPERATING INSTRUCTIONS
1.
Checking before turning on
Please check whether the unit is on the flat place, then check whether there is water
drop on the surface of unit, power cord and plug. If yes, please dry them first, and then
you can do the next step
2.
Connecting with the power
