usha FH 3213-H, Инструкция по эксплуатации

Страница: 7 / 12

7
HuMIDIFYING FuNcTIoN
Note:
- If the unit was subjected to negative temperatures, then before first switching
on it is recommended to keep the unit for 30 minutes at room temperature.
- Use the unit when the room temperature is from +5 to +40˚C and relative
humidity is lower than 80%.
- Water temperature should not be above +40˚C.
1. Unplug the unit.
2. Take the handle (10), remove the tray (11) and the water tank (9).
3. Turn over the water tank (9), open the lid, turning it anti clockwise.
4. Fill the water tank (9) with the necessary quantity of water and close the lid,
by matching the ledges on the lid with the grooves on the water tank and then
rotate the lid clockwise.
5. Place the filled water tank (9) on the tray (11), and then install the assembled
construction into the unit. Wait for some time, which is necessary for filling
the operation chamber with water.
6. Connect the unit to the mains, set the button (7) to the “I” position, the power
indicator (28) will light up and you will hear a sound signal.
7. Switch on the unit, by pressing the on/off button (19), you will hear a sound
signal, unit operation in the fan mode indicator (29) will light up and the room
temperature (21) indicator will be displayed.
8. Press the (20) button to switch on the humidifying function.
9. You can control steam output intensity by turning the handle (14).
10. If during the humidifying function operation the water tank (9) becomes
empty, the (27) indicator will light up on the display, and the unit will give a
signal to the user. In 3 minutes the unit will switch off automatically.
Note:
- If the water tank (9) becomes empty, the (27) indicator will light up; You
should take off the water tank and fill it with water.
- If during the humidifying function operation the tray with the water tank is
removed, the unit will switch off automatically.
clEANING AND MAINTENANcE
Warning! Always switch off and unplug the unit before cleaning. Hard water
causes appearance of mineral deposits on the sprayer, inner parts of the body
and in the water tank that leads to depression of operation of the unit and
appearance of white bloom on the inner parts of the container and the tray. To