Operation and Function
03/19
Fl Protect Set
18
8
Operation and Function
8.1
Operating conditions
8.1.1
Normal operation
In the event of a fault, Fl Protect separates the
consumer from the hot water supply by means of a
solenoid diaphragm valve.
The Fl Protect operating status can be seen via the
illuminated bezel (5) (see chapter8.2 "Status display").
An operation of Fl Protect is not necessary, because an
alarm as well as its resetting is done automatically by the upstream
Fl systems.
8.1.2
Restarting the system
Unplug the AC adapter (1) from the wall outlet or disconnect the
power supply.
wait ten seconds
Restore power supply
