12
Plugiator User Manual
PPPPPreset
reset
reset
reset
reset
The preset knob is used in the following actions:
a.
Rotating to scroll through presets of the currently selected plug-in.
b.
Single push down to enable numerical entry of a two-digit preset number
via the quick pads (preset 100 is entered as "00").
c.
Push and hold down for 3 seconds to store & overwrite modified preset
parameters into the internal memory of the Plugiator.
Plugin
Plugin
Plugin
Plugin
Plugin
The plugin knob is used in the following actions:
a.
Rotating to scroll through the list of plug-ins available on your Plugiator.
b.
Single push down to load the currently selected plug-in.
c.
Push and hold down for 3 seconds to send an "all notes off" MIDI message.
That function is useful to shut off a note which got stuck. Stuck notes typically
indicate a flaw in the MIDI keyboard, the sequencer or the MIDI interface
and are not usually caused by the Plugiator synth itself.
VVVVVolume
olume
olume
olume
olume
The volume knob is used in the following actions:
a.
Rotating to increase or decrease the output volume of the Plugiator both
on the Line outputs & the headphone out.
b.
Push, hold down and then rotating to change the MIDI channel number
[Channel 1 till Channel 16 & OMNI]. The MIDI channel will be set to the
currently displayed number when you release the push function of the
knob.