manualshive.com logo in svg

Uscom BP+, Руководство пользователя

Поделиться
Скачать
Uscom BP+ Скачать руководство пользователя страница 12

 

Figure 3: Ready Screen 

1.5  Connecting a Cuff to BP+ 

In order to take a measurement, you will need to connect an inflatable blood 

pressure cuff using the hose supplied with the cuff. 

To connect the cuff hose 

push the air fittings together until you hear and feel a 

positive “click”. 

To disconnect the cuff hose, 

pull gently on the metal hose fitting to release the 

internal lock, and remove hose from device.  
 

The BP+ has been developed using specific cuff designs.  Using alternate cuff 

designs may significantly alter the accuracy of measurement. 

Avoid compression or kinking the air hoses connecting the device to the cuff.  

Such actions, particularly during a measurement, may result in prolonged 

inflation of the cuff which cannot be resolved by the device’s built-in safeguards.  

Prolonged over-inflation of a cuff may result in harm to the patient. 
The operator should ensure that application of the cuff does not result in 

prolonged impairment of the circulation of blood. 
Do not connect cuffs with luer lock connectors to Intravenous System (IV). 

1.6  Saving Measurements 

The BP+ can store measurements if an SD Card is inserted.  The BP+ supports 

full size SD Cards with a storage capacity up to 32GB with FAT or FAT32 format. 

Insert the SD Card with the logo facing up to the user. 

 

Note: Measurements will not be stored if a compatible SD Card is not inserted 

into the BP+.  Look for the SD Card icon on the top left of the screen.  If the icon 

is not present, then no SD Card is inserted.  If the icon has a red cross through it, 

then the BP+ does not recognise the SD Card. 

 

 or 

 

Do not remove the SD card while a measurement is being performed or until the 

measurement is finished saving. Removing the SD card whilst a measurement is 

being saved can cause corruption of the SD card file system. If the SD card is 

accidently removed during a save operation its integrity should be checked using 

a PC. 

Page 12 of 31 

BP+ User Manual (R7)

 

Содержание BP+
































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды