Page 37
TD-09-06-1064 LPV 100 SEED TREATER
Storage
Section
G
When storing the LPV Seed Treater for long periods of time, the following procedure
must be followed to reduce the chance of rust, corrosion and fatigue of the treater.
You can also use these steps when storing the machine for the winter.
A dust mask and protective rubber gloves shall be used when
cleaning the machine.
TREATER
1.
Turn power off to the treater and treater components and lockout.
2.
Inspect all welds and structural components for bends, cracks and damage.
3.
Use a vacuum to clean out any seeds and excess build
-
up that may have occurred
during operation.
4.
Wipe down the motor casings with a damp cloth making sure to remove all dust that
may have collected since the last maintenance date.
5.
Wipe off and clean the lens of the proximity switches.
6.
Disconnect power and mount all guards back in place.
REFER
TO
PAGE 5
