USB to RS-422 & RS-485 Adapter
-41-
Figure 2.10
Figure 2.11
Windows should then display a message indicating that the installation was successful (Figure 2.12). Click
"Finish" to complete the installation for the first port of the device.
If the device is based on the FT2232, the second port must also be installed. The procedure for installing
the second port is identical to that for installing the first port from the first screen of the Found New
Hardware Wizard for the USB Serial Port device. If the driver is Microsoft WHQL certified, this is done
automatically.
Open the Device Manager (located in "Control Panel\System" then select the "Hardware" tab and click
"Device Manger") and select "View > Devices by Connection", the device appears as a "USB Serial
Converter" with an additional COM port with the label "USB Serial Port" (Figure 2.13). If the device is based
on the FT2232, two ports will be available from a composite USB device.
