USB XY-UMPD, Руководство пользователя

Страница: 10 / 17

声明：本说明书著作权归青岛欣易云联电子科技有限公司所有，未经允许任何单位或个人不得用于商业用途。
USB measurement main interface
：
Press the "set" key briefly, select "capacity / energy / time / data group" all, and the
corresponding will be displayed in reverse blue after selecting all. Use the "up / down" key
to switch the parameters to be cleared / set, and then press the "set" key briefly to clear /
set the corresponding parameters; after selecting, press the "set" key for 2 seconds or
more, and the operation without keys will exit automatically.
Dat0: only flicker to remind the value of
Ah and Wh
in the previous stage, and do not
accumulate to the next stage. When the current Ah is greater than 0.010Ah, stop flickering
and display the current value of Ah and Wh;
DAT1: the value of Ah and Wh in the previous stage will be added automatically.
Note: it is a stage from
ON
to
OFF