15
STRUCTURE
1. Trigger
2. Rotary Switch
or off the meter.
3. Display
4. "COM" Terminal
measurements except current measurements.
5. "+" Terminal
measurements except current measurements.
6. "HOLD" Button
7. "SELECT" Button
"SELECT"
button switches the meter between diode and continuity test functions.
"SELECT"
button
switches the meter between dc current and ac current measurements.
8
. " " Button
In dc current measurement function, this " " button can be used for zeroing
exit Relative mode.
9. Tactile Barrier
anywhere beyond the tactile barrier.
10. Jaws
Introduction for the Built-in Buzzer
Before the meter turns off automatically, it will sound several short beeps, 1 minute later
it will sound a long beep and then turn off automatically.
OPERATING INSTRUCTION
Data Hold Mode
Press the
"HOLD"
button to hold the present reading on the display, " " will appear
" " disappears.
Using Relative Mode
Selecting Relative mode causes the meter to store the present reading as a reference for
subsequent measurements and zero the display.
1. Press the " " button. The meter enters the Relative mode and store
the present reading as a reference for subsequent measurements, the symbol " "
appears on the display as an indicator. The display reads zero.
reference and the new measurement.
