USAG 076 A, Руководство пользователя

Страница: 14 / 152

14 14
SAFETY INFORMATION
This meter has been designed according to IEC-61010 concerning electronic measuring
instruments with a measurement category (CAT III 600V) and pollution degree
BOEUP
2
& $BOE & $
.
Warning
To avoid possible electric shock or personal injury, follow these guidelines:
฀
Do not use the meter if it is damaged. Before you use the meter, inspect the case.
Pay particular attention to the insulation surrounding the connectors.
฀
Inspect the test leads for damaged insulation or exposed metal. Check the test leads
for continuity. Replace damaged test leads before you use the meter.
฀
Do not use the meter if it operates abnormally. Protection may be impaired. When
in doubt, have the meter serviced.
฀
Do not operate the meter around explosive gas, vapor, or dust.
฀
Do not apply more than the rated voltage, as marked on the meter, between
terminals or between any terminal and earth ground.
฀ ฀ ฀ ฀ ฀ ฀ ฀ ฀ ฀ ฀ ฀
฀
When measuring current, turn off circuit power before connecting the meter in the
circuit. Remember to place the meter in series with the circuit.
฀
When servicing the meter, use only specified replacement parts.
฀ ฀ ฀ ฀ ฀ ฀ ฀ ฀ ฀ ฀ ฀ ฀ ฀ ฀ ฀ ฀
voltages pose a shock hazard.
฀
When using the probes, keep your fingers behind the finger guards on the probes.
฀
When making connections, connect the common test lead before you connect the
live test lead. When you disconnect test leads, disconnect the live test lead first.
฀
Remove the test leads from the meter before you open the battery cover or the case.
฀
Do not operate the meter with the battery cover or portions of the case removed or
loosened.
฀
To avoid false readings, which could lead to possible electric shock or personal
injury, replace the battery as soon as the low battery indicator (” ”)appears.
฀
Do not use the meter in a manner not specified bythis manual or the safety features
of the meter may be impaired.
฀
When in Relative mode (the symbol ” ” is displayed) or in Data Hold mode
(the symbol ” ” is displayed), caution must be used because hazardous voltage
may be present.
฀
Do not touch any naked conductor with hand or skin.
EN