US Water Systems 200-SENTRY-IX, Руководство пользователя

Страница: 3 / 24

Installation Instructions
200-SENTRY-IX Water Treatment System
Page 3
PRE-FILTER
(sediment filter) removes larger particles
such as sand, silt, rust and scale, (activated carbon filters)
remove chlorine and chloramine in the feed water to
protect the reverse osmosis membrane.
REVERSE OSMOSIS MEMBRANE
reduces
dissolved
minerals, metals and salts. During the process, harmful
compounds are separated by the membrane and the reject
water goes to waste (drain).
An activated carbon
POST-FILTER
is provided for a final
“polish” and to remove foul tastes, odors and to provide
great tasting drinking water.
FILTER HOUSINGS
and
R/O MODULE
hold pre-filters
and membranes. A
BRACKET
is provided so they may be
mounted, typically below sink. There is a dual filter
housing systems which holds the DI filters cartridges.
DI Filter Housings
are used to store the DI cartridges
and clean the water to DI quality. There is a conductivity
meter on the DI system to help monitor the DI quality being
produced.
STORAGE TANK
holds filtered water, ready for use.
AUTOMATIC SHUT-OFF VALVE (ASO)
senses when
the storage tank is full and closes the water supply to
conserve water. (not used in permeate pump system)
FEED WATER ANGLE STOP VALVE
is connected to
the cold water line to supply water to the R/O system.
WASTE WATER SADDLE VALVE
is connected to the
drain to remove reject water from the R/O system.
DI Cartridge
is used to treat the water to DI quality.
Components of the RO System