Discountcarstereo.com
2-2
PLAYLIST MODE:
Operate and control the iPod as if it was a CD Changer. This mode allows you
to access up to five playlist on the iPod. This is also referred to as
External Control Mode
. (See
Playlist Naming in section 4 of this manual).
Dip switch #2 on the PA11-CHR interface is for mode selection. The “ON” position is for
Playlist
Mode
and the “OFF” position is for
Direct Mode
. It is preset to “ON”
(Playlist Mode)
at the factory.
When in
Playlist Mode
the iPod is switched to
External Control Mode
and neither the
controls on the iPod nor the display are active—the iPod will displays “CHR, OK TO
DISCONNECT”.
Note: Disconnect the iPod from the PA11-CHR before switching DIP switch #2 from one mode to
the other.
2-3
AUX ADDITIONAL “AUX INPUT OPTION” SELECTION
PA11-CHR interface adapter is also capable of connecting an Auxiliary audio source to your
Chrysler radio, including the iPod. The additional audio source connects to the RCA input jack
marked “
AUX AUDIO INPUT”
. If you choose to use the “
AUX AUDIO INPUT”
, DIP switch #1 at the
side of the interface box must be set to the “OFF” position (it is preset to “ON” at factory).
The audio source (XM radio, DVD player, MP3 Player, Game system etc.) connected to the
“AUX AUDIO INPUT
” can be accessed at CD 6 Track1 after selecting CD Changer mode on
the Chrysler radio. CD 1 to CD4 are for accessing Playlist and CD 5 is for accessing all songs on
the iPod.
2-4 AUXILIARY INPUT OPERATION
If the
“AUX AUDIO INPUT
” option is selected, the radio will display “CD 6 Track 1” when DISC 6
button is pressed. Use “CD 6 Track 1” to access the audio source connected the “
AUX AUDIO
INPUT”
port. Adjust VOLUME, BASS, and TREBLE etc. as you would normally do for the other
program sources on the radio.
3.
CONNECTING & PLAYING THE iPod IN DIRECT MODE
The procedures for connecting and disconnecting the iPod to your PA11-CHR interface adapter
are described in this section. Please follow these instructions to avoid connectivity problems or
synchronizations errors between the iPod and CHRYSLER radio. When the iPod is connected to the
interface, the iPod’s screen will go blank for a few seconds before the normal screen returns. Set
the source on the radio to CD Changer, the audio from the iPod will be played back at DISC 5
Track1. Adjust VOLUME, BASS, TREBLE etc as you normally do for the other programs sources on the
radio.
4. CONNECTING & PLAYINGTHE iPod IN PLAYLIST MODE
4-1. Connecting the iPod to the interface.
Turn your CHRYSLER radio ON before connecting your iPod.
After connection, the iPod will take a
few minutes to change to external control mode. The iPod screen will then show:
You are now able to select iPod mode.
