US Robotics USR5610B, Руководство по установке

Страница: 4 / 16

4.
Step 4
Verify that the modem is
properly installed.
If you have Windows XP
Category View: Click Windows Start, and click Control
Panel. Click Network and Internet Connections, Phone
and Modem Options, and then click the Modems tab.
You should see a description of your modem and a
COM port setting. Click Modem, highlight the
description of your new modem, and click Properties.
Click the Diagnostics tab. Click the Query Modem
button. You should see a series of commands and
responses from the modem. This means that the
installation was a success. If your modem is not listed
and/or you do not see a series of commands and
responses, make sure that your internal modem is
physically installed correctly in your computer. With
power off, press the modem in firmly so that it is
seated properly in its slot. When the modem is
installed correctly, you will no longer see any part of
the gold edge. If your modem still does not work, you
may need to remove it and reinstall it in another
available PCI slot. Shut down and restart your PC.
Check your modem again using Control Panel as
described previously.
location and click Browse. Double-click your CD-ROM
drive and select Drivers. Click OK. Click Next. When
the driver is found, click Next. Click Finish to complete
the installation.
Windows 95 Users
Turn on your computer. Insert your Installation CD into
your CD-ROM drive before Windows opens. When the
Add New Hardware Wizard appears, click Next. If the
Wizard is unable to locate the driver, click Other
Locations. Click Browse and select your CD drive.
Select Drivers and click OK. Click OK on the Select
Other Location window. Click Finish. At this point you
may get an Insert Disk notice. Click OK. The Copying
Files screen will open. Click Browse and select your
CD-ROM drive. Double-click Drivers. Click OK. The
Copying Files screen will appear again. Click OK to
complete the installation.
Linux 2.3 and Higher Users
NOTE: All 2.3 and higher Linux kernels contain the
U.S. Robotics Linux modem drivers. Installation of the
modem under this kernel is fully automatic provided
your kernel has the Plug and Play module
enabled (default).
Step 3
Connect the modem to an
analog phone line.
Plug one end of the phone cord into the jack on
the modem labeled and plug the other end
into an analog phone wall jack.
When you are not using the modem, you can use a
telephone by plugging the telephone’s cord into
the modem’s jack.