manualshive.com logo in svg

US Robotics USR5462, Руководство пользователя

Поделиться
Скачать
US Robotics USR5462 Скачать руководство пользователя страница 21

Advanced Setup

17

Advanced Setup

Use the Web User Interface to define system parameters, manage 
and control the 802.11g 54Mbps Router and its ports, or monitor 
network conditions. The following table outlines the selections 
available from this program.

Menu

Description

System

Sets the local time zone, the password for administrator access, 
system log server, and the IP address of a PC that will be 
allowed to manage the 802.11g 54Mbps Router remotely.

WAN

• Specifies the Internet connection type: (1) Dynamic IP, (2) 

PPPoE configuration, (3) PPTP, (4) Static IP and ISP gateway 
address, or (5) BigPond (Internet service available in 
Australia).

• Specifies DNS servers to use for domain name resolution.

LAN

Sets the TCP/IP configuration of the 802.11g 54Mbps Router’s 
LAN interface and all DHCP clients.

Wireless

Configures the radio frequency, SSID, WPA/WEP encryption, 
and 802.1x for wireless communications.

NAT

Shares a single ISP account with multiple users, sets up virtual 
servers.

Firewall

Configures a variety of security and specialized functions, 
including: Access Control, Hacker Prevention, and DMZ.

DDNS

Dynamic DNS provides users on the Internet with a method to 
tie their domain name to a computer or server.

UPnP

With Universal Plug and Play, a device can automatically join a 
network, obtain an IP address, communicate its capabilities, and 
learn about the presence and capabilities of other devices. 
Devices can then directly communicate with each other. This 
further enables peer-to-peer networking.

Tools

Contains options to back up and restore the current 
configuration, restore all configuration settings to the factory 
defaults, update system firmware, or reset the system.

Status

Provides WAN connection type and status, firmware and 
hardware version numbers, system IP settings, as well as 
DHCP, NAT, and Firewall information.

Displays the number of attached clients, the firmware versions, 
the physical MAC address for each media interface, and the 
hardware version and serial number.

Shows the security and DHCP client log. 

Содержание USR5462















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды