file:///G|/CSO/Documentation/Documentation%20-%20Draft/Networking/5454%20Mach-1%20AP/User%20Guide/English/tut_client.html
which you will be connecting the Bridge. If you do not see the
Network Name
(SSID) of the
appropriate wireless network device, click
Scan
to search the area again.
If the appropriate network device does not appear or if that device is not broadcasting its
Network Name
(SSID), manually enter the information for the network device. You will need
to enter the
Network Name
, the
Wireless MAC Address
, and select the
Channel
of the
existing wireless network.
7. Next, you will need to select the security
Method
and enter the
Pass phrase
or the
Key
(depending on if you selected WPA PSK or WEP). These settings must match the security
information of the wireless network device to which you are connecting the access point. Bridge
mode only supports WPA2 in Infrastructure mode.
8. Select or enter any required
settings that you will need to connect to the
wireless network device.
9. Click
Save
at the bottom of the page.
file:///G|/CSO/Documentation/Documentation%20-%20Dra...4%20Mach-1%20AP/User%20Guide/English/tut_client.html (2 of 3)10/26/2006 9:47:11 AM
