US Robotics USR5454 Скачать руководство пользователя страница 125

Страница: 125 / 130

file:///G|/CSO/Documentation/Documentation%20-%20Draft/Networking/5454%20Mach-1%20AP/User%20Guide/English/warranty.html

1.5 U.S. ROBOTICS warrants to the CUSTOMER that this product will be free from

defects in workmanship and materials, under normal use and service, for TWO (2)

YEARS from the date of purchase from U.S. ROBOTICS or its authorised reseller.

1.6 U.S. ROBOTICS sole obligation under this warranty shall be, at U.S. ROBOTICS sole

discretion, to repair the defective product or part with new or reconditioned parts; or to

exchange the defective product or part with a new or reconditioned product or part that

is the same or similar; or if neither of the two foregoing options is reasonably available,

U.S. ROBOTICS may, at its sole discretion, provide a refund to the CUSTOMER not to

exceed the latest published U.S. ROBOTICS recommended retail purchase price of the

product, less any applicable service fees. All products or parts that are exchanged for

replacement will become the property of U.S. ROBOTICS.

1.7 U.S. ROBOTICS warrants any replacement product or part for NINETY (90) DAYS

from the date the product or part is shipped to Customer.

1.8 U.S. ROBOTICS makes no warranty or representation that this product will meet

CUSTOMER requirements or work in combination with any hardware or software

products provided by third parties.

1.9 U.S. ROBOTICS makes no warranty or representation that the operation of the

software products provided with this product will be uninterrupted or error free, or that

all defects in software products will be corrected.

1.10 U.S. ROBOTICS shall not be responsible for any software or other CUSTOMER data

or information contained in or stored on this product.

2.0 CUSTOMER OBLIGATIONS:

file:///G|/CSO/Documentation/Documentation%20-%20Dr...54%20Mach-1%20AP/User%20Guide/English/warranty.html (2 of 7)10/26/2006 9:47:18 AM

Содержание USR5454



































































































































Результаты поиска

Содержание USR5454

Отзывы:

Бренды по названию

Популярные бренды

US Robotics USR5454, Руководство пользователя

Результаты поиска

Содержание USR5454

Отзывы:

Бренды по названию

Популярные бренды