Congratulations!
You have finished installing your hardware and your
drivers! It is recommended that you reboot your machine. You will now see a
small icon for the Configuration Utility in the system tray by your clock.
The Configuration Utility is used to change or
verify the configuration information that
relates to your 11 Mbps Wireless USB Adapter.
The Configuration Utility icon will be colored
to indicate the status of your wireless
network: red for disconnected, yellow for
connected with weak quality, and green for
connected with good quality.
You must now configure each computer that has an 11 Mbps Wireless USB
Adapter in order to share Internet connectivity, files, and a printer. Refer to the
User Guide on the U.S. Robotics Installation CD for this information.
The 11 Mbps Wireless USB Adapters are set to
Infrastructure/Auto Detect
by
default.
802.11b Ad Hoc
mode is used for peer-to-peer network configurations.
Infrastructure
mode is used to add a Wireless Access Point to the wireless
network configuration. Each 11 Mbps Wireless USB Adapter in the wireless
network must have the correct mode selected within the Configuration Utility.
It is recommended that you take this opportunity to register your 11 Mbps
Wireless USB Adapter. Insert the Installation CD-ROM in the CD-ROM drive and
follow the on-screen instructions.
For troubleshooting and support information, refer to the Companion Reference
Guide, to the User Guide on the U.S. Robotics Installation CD-ROM, or to the U.S.
Robotics Website.
Printed in Taiwan
