Install your software
Attention!
You will need to install this software on all the PCs or
laptops you plan to wirelessly network together using wireless USB
devices.
Insert your U.S. Robotics Installation CD-ROM into your CD-ROM drive.
Note:
If the Choose Setup Language window appears, select your
preferred language and click
OK
.
Note:
If your CD-ROM does not automatically launch, click Windows
Start
,
Run
, and type
D:\setup
(or the appropriate letter of your CD-
ROM drive) and click
OK
.
Some files will be copied to your system, and then you will be asked to read the
license agreement. Read the agreement and click
Yes
.
The Installation CD Graphic User Interface (GUI) will appear on your screen.
Click
Software
.
Click
Install Wireless Adapter Configuration Utility
. Follow the on-screen
instructions and wait for some files to be copied to your hard drive.
You will be prompted to select your Wireless Mode. Select
Infrastructure Mode
if you will be using a Wireless Access Point. Select
802.11 Ad-Hoc Mode
if you
will be in a peer-to-peer network. After you select your Wireless Mode, click
Next
.
You will be prompted for an SSID. If you do not have an existing wireless
network, leave the default setting of
ANY
and click
Next
. If you have an existing
wireless network, enter the SSID and click
Next
.
Continue to follow the on-screen instructions to finish the installation
procedure. When you are prompted, select
Yes, I want to restart my computer
now
and click
Finish
.
Remove the Installation CD-ROM, reboot your computer, and prepare to install
your hardware.
