Setups for Common Windows Software Packages 5-7
Trumpet Winsock
1
From Windows, double-click the Trumpet Winsock icon.
Select Dialler, and then Edit Scripts.
2
Open the LOGIN.CMD file. Change these lines:
output AT&F1\13
input 10 OK\n
output atdt
<phone number to dial>
3
Exit and save the changes you made.
4
From File | Setup,
under SLIP Port, enter the COM port
number that the Courier is using, its Baud Rate, and check
Hardware Handshake.
You’re now ready to call your Internet service provider.
Select Dialler | Login.
Win CIM (CompuServe)
1
From Windows Main, double-click on Control Panel. From
Control Panel
, double-click on Ports. Set the COM port that
the Courier is using to 19200 baud rate and Hardware flow
control.
2
Start the WinCIM program, and select Special and then
Session Settings. Make sure that you choose the COM port
that the Courier is using and set the baud rate to 19200.
3
From the Special pull-down menu, select Modem Control
Strings
. Your modem type should be Current and
Initialize
should show this string:
AT&F&B1&H1&R2&A3&K3X4^M
Reset
should show &F, Connect should show CONNECT,
and Suffix should show ^M.