background image

Specifications and dimensions subject to change without notice.

US LED

      |      6807 PORTWEST DR      |      HOUSTON, TX 77024      |      T 866 972 9191      |      F 713 972 9393      |      [email protected]      |      

www.usled.com

  

UPDATED 07.09.2012

44-000008 REV A

Printed in China

BATTERY BACKUP 

INSTALLATION INSTRUCTIONS

GTR2 SERIES

The Battery Backup can be wired to run on either 
120VAC or 277VAC.  The area shown inside the blue 
hash marks (Fig 1&2) shows the connections that 
need to be made. 

For 120VAC operation (Fig 1) make the following con-
nections using wire nuts

Connect the low voltage Red and Blue wires to fixture

Cap the orange 277V wire

Connect Black 120V and one of the Orange/Black 
wires from BSL26C

Connect the second Orange/Black wire to hot side 
of switch

Connect Red/White wire to switched side of switch

Connect the 120VAC input wires Hot, Neutral, 
and Ground

 7

 6

 5

 4

 3

 2

 1

This document describes the wiring requirements for Battery Backup Emer-

gency LED Driver: Battery Backup for PUB-UNV4-1400 and PUB-UNV4-1670

 6

 5

 4

 3

 2

 1

For 277VAC operation (Fig 2) make the following 
connections using wire nuts

Connect the low voltage Red and Blue wires to fixture

Cap the Black 120V wire

Connect Orange 277V and one of the Orange/Black 
wires from BSL26C

Connect the second Orange/Black wire to hot side 
of switch

Connect Red/White wire to switched side of switch

Connect the 277VAC input wires Hot, Neutral, 
and Ground

To prevent high voltage from being present on yellow and yellow/black output leads prior to installation, 

converter connector (red wire with connector and white wire with connector) must be open. Do not join 

converter until installation is complete and AC power is supplied to the emergency driver.

Emergency driver and LED driver must be fed from the same branch circuit.

An un-switched AC power source is required (120 or 277 VAC, 60Hz).

Do not attempt to service the battery. A sealed, no-maintenance battery is used that is not field replaceable.

THIS PRODUCT CONTAINS A RECHARGABLE (Ni-Cd) NICKEL-CADMIUM BATTERY. THE BATTERY 

MUST BE RECYCLED OR DISPOSED OF PROPERLY.

Отзывы: