fig. 7
fig. 8
fig. 9
fig. 10
emitter Cover Screws
About every one to three months, check and
clean stainless steel emitter as necessary.
1) Unplug the CatMouse MultiPet (fig. 7).
2) Simply turn unit upside down on a soft
towel. Rotate screws counter-clockwise on
stainless steel emitter cover (fig. 8).
3) Remove stainless steel emitter by lifting
straight up and out (fig. 9). Gently brush,
wipe and/or rinse off with water and a mild
detergent like dish soap (fig. 10). Always
thoroughly dry emitter before reinstalling.
4) Carefully, correctly re-align emitter on each
side (note alignment markings) and gently
reinstall by rotating screws clockwise on
emitter cover until snug. Do not overtighten.
To keep your CatMouse MultiPet unit
operating at absolute peak performance in
heavy, constant use on HI output, we
recommend inspecting and cleaning it
monthly as needed.
CatMouse MultiPet
Operation & Installation
13
DANGER:
Always unplug the unit
before performing any maintenance.
CAUTION:
Never use solvents or
harsh chemicals to clean any portion
of the unit.
DANGER:
Keep the unit itself away
from water sources including rain,
bathtubs, sinks and pools.
Содержание CatMouse
Страница 23: ......
